Device Foxconn F911 is the android phone made by Foxconn to market generic midend and marketed. Where every vendor is entitled to use product names on the device foxconn berbeda2 F911. This is a list of products that are marketed foxconn F911 worldwide

• Orange Boston
• Gigabyte GSmart G1305
• Motorola XT5
• Apanda A60
• Vibo A688
• Chinavision Excalibur
• Muchtel A1
• Wellcom A88
• Commtiva Z71
• Cincinnati Bell Blaze
• Nexian Journey

F911 foxconn all devices can use the same ROM ... it is no wonder many ROMnya development. you can choose various ROMs that are available. Currently ROM Official stops at version 2.1 Eclair, but ROM Unofficial / Custom ROM is now out in the stable version 2.2 Froyo. It will not be long before devices Foxconn F911 will enjoy a version 2.3 or Gingerbread.

Device foxconn F911 has the following specifications:

• GSM 850 / 900 / 1800 / 1900
• HSDPA 900 / 1900 / 2100
• TFT capacitive touchscreen, 256K colors
• Resolution 320 x 480 pixels, 3.2 inches
• Accelerometer sensor for auto-rotate UI
• Speakerphone Yes
• 3.5 mm audio jack
• Internal 256 MB RAM
• Card slot microSD, up to 16GB
• Data GPRS Class 10 (4 +1 / 3 +2 slots), 32 - 48 kbps
• EDGE Class 10, 236.8 kbps
• HSDPA, 7.2 Mbps
• Wi-Fi 802.11 b / g
• Bluetooth Yes, v2.0 with A2DP
• Camera 5 MP, 2592х1944 pixels, autofocus (device specific), LED flash
• CPU Qualcomm MSM 7227 600 MHz processor (ARMv6)
• GPS, with A-GPS support

Battery Standard battery, Li-Po (Some devices uses Li-Ion)

basic knowledge related to the device Foxconn F911

Flashing
--------

Flashing is to fill in the form of ROM memory operating systems on mobile devices ....
There are several ways in foxconn f911 flashing methods include:


Stand-alone
-------------

Namely flashing Micro method SDCard ... where the ROM file that will be flashed stored in SDCARD and in flash on the Recovery Mode without the need for connection to a computer ..
The way the tutorial flashing below ....


AGM / SUT
------------

This application is used to flashing by using a connection to a computer using a data cable ... AGM used for windows based 32bit and 64bit SUT is used on windows ...

If using this method to consider is the drivers are installed when the phone connected to the computer ... flash failure using this method is often difficult to detect computer drivers properly ...

each ROM upgrade may not be the same drivers used for flashing in the previous ...

if you have a failure like this:

is nothing but a driver issue ... use a variety of drivers who have been uploaded by other users in the lounge the previous thread ...

or you can use this method for Windows 7 or Vista

• enter the mode continues to plug into the computer fastboot
• Win7 will fit fastboot mode drivers to internet search
• wait until not found / can directly
• control panel
• device manager
• Right click android
• properties
• driver
• update drivers
• let me pick from a list
• android_usb.inf

Flashing using AGM / SUT can in some way that is recovery mode or download fashion ...

Recovery Mode
Recovery mode is a place where we can do the basic settings in the phone. Recovery function modes are as follows:

• Flashing ROM
• Data Wipe
• Battery Reset Stat
• G Sensor Reset
• Wipe partition * only in the custom rom *
• Create Partition * only in the custom rom *
• Format Partition * only in the custom rom *
• Enable APP2SD * only in the custom rom *

how to get into Recovery mode

• Vol Up + Camera + Power
• Using the Application HOT Reboot * download on the market *
• Using Application Manager * download ROMs on the market *

  
For example: recovery mode

Download mode

Download mode is the mode where mobile phones are ready to diflashing ... all the flashing process via the method both Stand Alone and RUT ... eventually will go to the Download mode ..

how to get into download mode

• Vol ups + red button + power
• Using the Application HOT Reboot * download on the market *
• Using Application Manager * download ROMs on the market *

Examples for Download mode:

Posted in: